Pop-Up Beam tubes S355J2H | TM-Rauta

Beam tubes EN10219 S355J2H

Measurement tolerance

		Rounded			Squared/Rectangled
External Dimensions (D, B and H)		± 1 % min. ± 0.5 mm			Side length (mm)		Tolerance
		ja max. ±10 mm			H,B < 100		±1 % min. ± 0.5 mm
					100 ≤ H,B ≤ 200		± 0.8 %
					H,B > 200		± 0.6 %
Thickness (T)		D ≤ 406.4 mm			T ≤ 5 mm		±10 %
		T ≤ 5 mm ± 10 %
		T > 5 mm ± 0.50 mm			T > 5 mm		± 0.50 mm
		D > 406.4 mm ± 10 %
		max. 2 mm
Roundness toleration (O)		2 % D/T < 100			–
Side flatness		–			Max. 0.8 %, min. 0.5 mm
Side squareness		–			90° ± 1°
Corner outer radius		–			T ≤ 6.0		1.6T – 2.4T
					6.0 < T ≤ 10.0		2.0T – 3.0T
					T > 10.0		2.4T – 3.6T
Twist (V)		–			2 mm plus 0.5 mm/m length
Straightness		0.20 % of total length			0.15 % of total length
Weight (M)		± 6 % single tube			± 6 % single tube
Length		-0 + 50 mm			-0 + 50 mm

Beam tubes EN10210 S355J2H

Measurement tolerance

			Squares/Rectangles				Rounded
External dimensions (D ja H)			± 1 %, min ± 0,5 mm				± 1 %, min ± 0,5 mm ja max ± 10 mm
Thickness (T) welded			−10 %				−10 %
Side squareness			90 degrees ± 1 degree				–
Corner outer radius			3T max				–
Side flatness (x)			± 1 % of side length				–
Twist (V)			2 mm plus 0,5 mm/m max.				–
Weight (M)			± 6 % single tube				± 6 % sigle tube
Straightness			max. 0,2 % of total length				max. 0,2 % of total length
Length			+ 150 mm-0				+ 150 mm-0